|
 |
HLK-33800 Compact Cutter The HLK-33800 compact cutter is a double acting device capable of cutting steel wire rope up to 1 Inch (25mm) diameter and steel bar up to 1 / 2 Inch diameter. The cutter has a shaped closure for the cable such that it will cut full diameter in one pass. The unit comes with an intensifier allowing operation from a 140 Bar supply. Weight in water is approximately 8.2kg in water. Various mounting options available. |
|
| PDF Data Sheet :Product in use | ||
 |
HLK-33900 Standard Cutter The HLK-33900 standard cutter is a double acting device capable of cutting steel wire rope up to 1 / 2 Inch (38mm) diameter and steel bar up to 1 Inch diameter. The cutter has a shaped closure for the cable such that it will cut full diameter in one pass. The unit comes with an intensifier allowing operation from a 140 Bar supply. Weight in water is approximately 14.3kg. Various mounting options available. |
|
| PDF Data Sheet : Product in use. | ||
 |
HLK-33600 0 - 4" Cutter The Hydro-Lek 4" cutter can be operated directly from a work class hydraulic supply or from a system comprising of the HLK-90200 and 9200 Power packs or HLK-90100 Dual Power Pack, HLK-7020 Valve Pack or HLK-72100 and control system. The cutter jaws grab the hose or cable to be cut and then a rotating disc is fed onto the job to be cut. The grip is so strong that even in zero visibility and locked on, a perfect cut can be easily achieved. Weight 12Kg in water.
|
|
| PDF Data Sheet : Product in use. | ||
 |
HLK-3150 Suction Pump The HLK-3150 Suction Pump is a compact Venturri device designed to provide controlled flows for suction anchor installation and removal. Together with the HLK-3100 Water Jet it can be fitted to the smaller ROV's, either within the frame or skid mounted. This enables suction tasks as well as jetting in one package.
|
|
| PDF Data Sheet : Product in use. | ||
|
HLK-3200 Sub-sea drill The HLK-3200 Sub-sea Drilling System was designed for drilling holes so that sacrificial anodes could be fitted under water. It uses a heavy-duty magnet to hold the drilling system in place, while a hydraulic motor rotates the drill. An HLK-1080 Cylinder with a flow control valve pushes the drill carriage down the guide rods to drill the hole. |
|
| PDF Data Sheet : | ||
 |
HLK-31000 water jet The HLK-31000 Water Jet, has been developed to assist in cleaning tasks needed on many sub-sea structures before intervention. Driven by a 3 phase motor, the pump can deliver 18 litres per minute at 120 bar, though an orbital nozzle. The nozzle can be deployed by a manipulator or fixed on the ROV and directed by the ROV itself. |
|
| PDF Data Sheet : Product in use. |
