HomeNuclearSubseaDefenceCompany profileContact

Control valvesElectronic control systemsHydraulic componentsHydraulic cylindersManipulatorsManipulator componentsNuclear decommissioningPan & tiltsPower packsToolingTooling skidsValve packs

HLK-90200 Power Pack

This compact device is housed in a 100 mm diameter pod. It incorporates a universal 400 watt 240v (AC/DC) motor, which drives a gear pump which delivers 140 bar at 0.5 Litres per minute and is designed to operate all HLK Manipulator systems. The standard system is designed to operate at 1000mtrs. 3000mtr systems are also available. Weight 2.5Kg in water.

PDF Data Sheet

HLK-90000 Power Pack:

The HLK-90000 Power pack is a three phase powered unit which can be supplied for operation on either 415 (Delta) or 660 (Star) Volts. The motor is fitted in an oil-filled, pressure compensated housing, which is separate to the pump and reservoir. An optional electrical pressure sensor can be fitted with a separate connector for remote pressure monitoring.

PDF Data Sheet

 

HLK-91000 Power Pack:

The HLK-91000 Power Pack has been designed to fit on the new range of small ROV's. It can deliver 0.3Litres per minute at 210 BAR for an electrical input of 24 or 48 Volts DC at 300 Watts. The Power Pack is only 63mm high; it has a footprint of 223 x 110mm and weights 2.5Kg in water.

 

PDF Data Sheet

 

HLK-90100 Power Pack

This 3-phase power pack has two hydraulic pumps running from a common rotor shaft. One hydraulic pump delivers a high pressure, medium flow for operating manipulator arms whilst the other pump is a high flow lower pressure system for operating tooling options, egg cutters, torque tools, etc. The motor is mounted in a separate, oil filled, pressure compensated housing.

PDF Data Sheet

 

HLK-90130 Power pack

The HLK-90130 Power pack is a three phase powered unit which can be supplied for operation on either 440 or 660 Volts. The motor is fitted within an oil-filled, pressure compensated housing, which is separate to the pump and reservoir. The pump has an oil
filter fitted to prevent contamination from being circulated through the hydraulic system.

 

PDF Data Sheet

 

HLK-90150 Power Pack

The HLK-90150 Power Pack is a 3-phase 4.5KW hydraulic power pack. It can be supplied with various voltage motors, typically 440 or 660V. It produces 15 litres/min at 140 BAR.
The motor housing is compensated separately from the hydraulic pump to lessen the possibility of water contamination.

 

PDF Data Sheet