|
 |
HLK-6000 Pilot Check Block: These tiny units are used in conjunction with HLK control systems to ensure a positive hydraulic lock when a manipulator is not being operated. The porting is 7/16 SAE and can be used in conjunction with HLK fittings. Made up into a set they can be mounted with Quick Connects to enable easy change out of manipulators. Weight in water 140gms. |
|
| PDF Data Sheet: | ||
 |
HLK-6020 Series Control Valves A range of control valves for both hydraulic and water systems. A manual pressure regulator valve, a hydraulically operated high - low pressure flow valve and a hydraulically operated selector valve are show in the adjoining picture. Manufactured from 316 stainless steel.
|
|
| PDF Data Sheet: | ||
|
HLK - 6600a Series Valves - 3 position changeover Designed as a cost-effective option for installation on suction anchors. These spool valves can be configured as open/shut or three-position change over units. Pipe size from 1" to 12" or even bigger if required. Constructed in 316SS Delrin, each of these units can be remotely operated using HLK 1300 series pistons. |
|
| : | ||
 |
HLK - 6600b Series - 6 inch Shut Off Valve This larger shut off valve is hydraulically actuated. It enables water flow in either direction during installation and retraction of a suction anchor. |
|
 |
The HLK-60210 Dual Port Vent Valve The HLK-60210 Dual Port Vent Valve is designed for fitting to soft tanks on submersible and air lift devices. It incorporates a unique dual supply piston drive which enables the valve to be opened from two different supplies, being either hydraulic or air or a combination of both. |
|
 |
HLK-60120 Bi-Directional Valve The HLK-60120 Bi-Directional Valve houses a bi-directional solenoid operated cartridge |
|
| PDF Data Sheet: |
